ReflectASeal 525

Description:
REFLECTASEAL-525 Pre-Prime removes rust and film, preparing metal surfaces for coating. The convenient gel formula mixes easily with water. It reacts with rust and oxide films to restore metal surfaces, leaving a thin film to prevent further rusting. REFLECTASEAL-525 Pre-Prime removes mineral buildup, water stains, and debris. It also removes the film that is present on new galvanized metal.

ReflectASeal 505 Concrete Primer

Description:
REFLECTASEAL-505 is a polyamide epoxy primer designed to penetrate and seal concrete surfaces, leaving a smooth, pinhole and bubble free surface. The formulation includes a long pot life as well as a low sensitivity to substrate moisture, allowing it the ability to bond when applied to a damp surface.

ReflectASeal 450

Description:
REFLECTASEAL-450 is a tough and flexible protective coating for concrete and metal. It is a 100% solid Polyamidoamine epoxy resin used in various applications where chemical and corrosion resistance is required. No VOC.
Resistance:
REFLECTASEAL-450 is highly resistant to acids, solvents, caustics, hydrocarbons, saltwater, and freshwater. It was developed to withstand extreme corrosive and abrasive conditions with excellent outdoor durability.

ReflectASeal 425

Description:
ReflectASeal-425 is an 80 % solids epoxy resin polyamide coating formulated for continuous submersion underwater.
Application Areas:
ReflectASeal-425 is a self priming protective epoxy coating designed for adhering to almost any clean surface including, metals of all types, concrete, masonry, plaster, and other surfaces. ReflectASeal-425 is used in commercial and industrial surroundings.

ReflectASeal 405

Description:
REFLECTASEAL-405 is a flexible two-part epoxy designed to protect a variety of vertical and horizontal surfaces, including stucco, concrete, cinder block, brick, stone, wood, and others. It is especially suited to applications where surface movement may defeat the protection of a rigid coating.

ReflectASeal 400

Description:
REFLECTASEAL-400 is a high-solids polyamide-epoxy resin. The formulation includes a long pot life as well as flexible properties, which allows it to withstand abrasive conditions and have a high impact resistance. REFLECTASEAL-400 is a decorative and protective epoxy coating developed for metals of all types.
Application Areas:
REFLECTASEAL-400 is a self priming protective coating for metal: walls, tanks, pipes, floors, stairs, decks, equipment, and much more. REFLECTASEAL-400 can be used where dampness may prevent the use of other coatings. REFLECTASEAL-400 is used in commercial and industrial surroundings.

ReflectASeal 100 Flexible Waterproof Coating

Description:
REFLECTASEAL-100 Flexible Waterproof Coating is a flexible two-part epoxy designed to protect a variety of surfaces including rubber, concrete, foam, plywood, metal and petroleum-based surfaces. It is especially suited to applications where surface movement may defeat the protection of a rigid coating.
Application Areas:
REFLECTASEAL-100 is excellent for waterproofing EPDM, TPO, PVC, built-up, single ply, polyurethane foam, concrete, and metal roofs. The flexibility retained by REFLECTASEAL-100 allows for surface movement caused by thermal shock to most estructures.

ReflectASeal-SCP-UV

Description ReflectASeal-SCP-UV is a VOC compliant UV stable top coat, high in chemical and abrasion resistance for a variety of substrates. ReflectASeal-SCP-UV has been designed to function as a high performance, one component moisture cure urethane UV top coat system, designed for use on steel, aluminum, and stainless steel, galvanized metal, wood and concrete leaving a bubble-free coating. Working time is adjustable by selective addition of catalyst. It also exhibits a low sensitivity to substrate moisture, when applied to damp surfaces.

ReflectASeal 2CLR

Description
Two component, batch mix polyaspartic coating
Long pot life
Moderate tack free time
Good hydrolytic stability up to 160º F
Excellent water resistance
Good resistance to acids and hydrocarbon solvents
Excellent resistance to oxygenated solvents, chlorinated solvents and inorganic bases. See chemical resistant sheet
UV Stable/non-yellowing (clear or tinted, any color)
No VOC’s/no odor
Will not crack or break at any temperature.

ReflectASeal 200

Description:
REFLECTASEAL-200 is a high-solids polyamide-epoxy resin. The formulation includes a long pot life as well as flexible properties, which allows it to withstand extreme abrasive conditions. REFLECTASEAL-200 is a decorative and protective epoxy coating especially developed to protect and seal concrete floors. REFLECTASEAL-200 is best suited for, but not limited to, horizontal surfaces.