ReflectASeal 300

Description:
REFLECTASEAL-300 is a polyamide, two-component epoxy base sealant. This compound chemically cures into an elastic and flexible body which will not dry out or harden after curing (caulking compound). It does not oxidize or absorb moisture.
Application Areas:
REFLECTASEAL-300 is an interior or exterior water tight joint sealant for curtain walls, prefab panels, roofs, flashing, coping, and air ducts. It can also be used between similar and dissimilar materials, vertical, and/or horizontal joint work. REFLECTASEAL-300 can also be applied on to wet surfaces and if necessary can cure underwater.

ReflactASeal SCPR

Description:
ReflectASeal-SCPR is a VOC compliant primer, high in chemical and abrasion resistance for a variety of substrates. ReflectASeal-SCPR has been designed to function as a high performance, one component, and moisture cure urethane primer system, designed for use on steel, aluminum, and stainless steel, galvanized metal, wood and concrete. Its low viscosity allows it to penetrate into porous surfaces, leaving a bubble-free coating. Working time is adjustable by selective addition of catalyst. It also exhibits a low sensitivity to substrate moisture, leaving only minimal bubbling when applied to damp surfaces.

ReflectASeal 550

Description:
REFLECTASEAL-550 is a high-solids polyamide-epoxy resin. The formulation includes a long pot life as well as flexible properties, which allows it to withstand extreme abrasive conditions and a high tolerance to impact resistance. REFLECTASEAL-550 is a metal primer developed specifically as a rust inhibitor for metal roof applications.

ReflectASeal 525

Description:
REFLECTASEAL-525 Pre-Prime removes rust and film, preparing metal surfaces for coating. The convenient gel formula mixes easily with water. It reacts with rust and oxide films to restore metal surfaces, leaving a thin film to prevent further rusting. REFLECTASEAL-525 Pre-Prime removes mineral buildup, water stains, and debris. It also removes the film that is present on new galvanized metal.

ReflectASeal 505 Concrete Primer

Description:
REFLECTASEAL-505 is a polyamide epoxy primer designed to penetrate and seal concrete surfaces, leaving a smooth, pinhole and bubble free surface. The formulation includes a long pot life as well as a low sensitivity to substrate moisture, allowing it the ability to bond when applied to a damp surface.

ReflectASeal 450

Description:
REFLECTASEAL-450 is a tough and flexible protective coating for concrete and metal. It is a 100% solid Polyamidoamine epoxy resin used in various applications where chemical and corrosion resistance is required. No VOC.
Resistance:
REFLECTASEAL-450 is highly resistant to acids, solvents, caustics, hydrocarbons, saltwater, and freshwater. It was developed to withstand extreme corrosive and abrasive conditions with excellent outdoor durability.

ReflectASeal 425

Description:
ReflectASeal-425 is an 80 % solids epoxy resin polyamide coating formulated for continuous submersion underwater.
Application Areas:
ReflectASeal-425 is a self priming protective epoxy coating designed for adhering to almost any clean surface including, metals of all types, concrete, masonry, plaster, and other surfaces. ReflectASeal-425 is used in commercial and industrial surroundings.

ReflectASeal 405

Description:
REFLECTASEAL-405 is a flexible two-part epoxy designed to protect a variety of vertical and horizontal surfaces, including stucco, concrete, cinder block, brick, stone, wood, and others. It is especially suited to applications where surface movement may defeat the protection of a rigid coating.

ReflectASeal 400

Description:
REFLECTASEAL-400 is a high-solids polyamide-epoxy resin. The formulation includes a long pot life as well as flexible properties, which allows it to withstand abrasive conditions and have a high impact resistance. REFLECTASEAL-400 is a decorative and protective epoxy coating developed for metals of all types.
Application Areas:
REFLECTASEAL-400 is a self priming protective coating for metal: walls, tanks, pipes, floors, stairs, decks, equipment, and much more. REFLECTASEAL-400 can be used where dampness may prevent the use of other coatings. REFLECTASEAL-400 is used in commercial and industrial surroundings.

ReflectASeal 100 Flexible Waterproof Coating

Description:
REFLECTASEAL-100 Flexible Waterproof Coating is a flexible two-part epoxy designed to protect a variety of surfaces including rubber, concrete, foam, plywood, metal and petroleum-based surfaces. It is especially suited to applications where surface movement may defeat the protection of a rigid coating.
Application Areas:
REFLECTASEAL-100 is excellent for waterproofing EPDM, TPO, PVC, built-up, single ply, polyurethane foam, concrete, and metal roofs. The flexibility retained by REFLECTASEAL-100 allows for surface movement caused by thermal shock to most estructures.